Thursday, April 29, 2010
1 MALAYSIA
1Malaysia
1Malaysia is an on-going campaign announced by Malaysian Prime Minister Najib Tun Razak on September 16, 2008, calling for the cabinet, government agencies, and civil servants to more strongly emphasize ethnic harmony, national unity, and efficient governance.
Ideology
1Malaysia strongly emphasizes national unity, ethnic tolerance, and government efficiency. The eight values of 1Malaysia as articulated by Najib Razak are perseverance, a culture of excellence, acceptance, loyalty, education, humility, integrity, and meritocracy.
Public policy
1Malaysia is an on-going campaign announced by Malaysian Prime Minister Najib Tun Razak on September 16, 2008, calling for the cabinet, government agencies, and civil servants to more strongly emphasize ethnic harmony, national unity, and efficient governance.
Ideology
1Malaysia strongly emphasizes national unity, ethnic tolerance, and government efficiency. The eight values of 1Malaysia as articulated by Najib Razak are perseverance, a culture of excellence, acceptance, loyalty, education, humility, integrity, and meritocracy.
Public policy
Improving government efficiency is an important aspect of 1Malaysia. The use of Key Performance Indicators (KPIs), metrics and targets more typically used in private business, and National Key Result Areas (NKRAs) is thus naturally an important part of the 1Malaysia effort.Najib says, "The government is committed to carrying out a transformation programme as its main agenda based on approaches and philosophy of 1Malaysia -- people first, performance now."
Immediately after assuming the office of Prime Minister of Malaysia Dato Ser Najib Tun Razak introduced a series of KPIs in order to measure and improve the efficiency and quality of government services as well as realizing the 1Malaysia concept. Najib said that KPIs were implemented to ensure “the people’s satisfaction...whether they are satisfied with our service, whether we have solved their problems.”
Najib's announcement of the KPI effort was generally well-received. Deputy Prime Minister Tan Sri Muhyiddin Yassin said the KPI formula was a yardstick against which the people could measure the performance of Najib and the government. He said the KPIs would provide motivation for every minister to perform well.
The KPIs provide a mechanism for the evaluation of ministries and other government agencies including performance reviews carried out every six months. Each ministry has been required to establish specific KPIs including that focus on policy outcomes over the traditional emphasis on inputs typically found in government performance assessments and planning. KPIs include detailed job descriptions and goals for ministers, deputy ministers, and some other senior government officials.
Najib has identified six major policy areas in which KPIs will play an especially important role in improving the effectiveness of the Malaysian government. These are known as National Key Result Areas (NKRAs). The NKRAs include crime prevention, reducing government corruption, increased access to quality education, improvements in the standard of living for low income groups, upgrades to rural infrastructure, and improvements in public transportation.
Najib also introduced a new cabinet position to support the Unity and Performance Minister in implementing the KPI system. Idris Jala, the former CEO of Malaysia Airlines, was appointed Minister Without a Portfolio and CEO of Performance Management and Delivery Unit (Pemandu), to work with Dr. Koh Tsu Koon in training over 500 government officers to implement the KPI system. As CEO of Pemandu Idris will support the work of Koh, who is the minister in charge of National Unity and Performance Management.
Website and social media
1Malaysia.com.my has been created in order to facilitate the 1Malaysia campaign by providing a platform for public dialogue that Prime Minister Razak claims will promote Malaysian unity, religious and ethnic tolerance, as well as a deeper appreciation of Malaysia’s cultural diversity. 1Malaysia is also making extensive use of social media tools such as Facebook and Twitter.
Promotional activities
The 1Malaysia concept is being promoted through a wide range of activities.
Prime Minister Najib has instructed the National Civics Bureau or Biro Tata Negara (BTN) to use its courses and seminars to educate present and future civil servants, politicians, and community leaders about 1Malaysia and promote national unity. Deputy Prime Minister Ahmad stated, “We will ensure that the BTN courses also inculcate the 1Malaysia concept and its eight values, namely high performance culture, accuracy, knowledge, innovation, integrity, strong will, loyalty and wisdom.”
Radio Television Malaysia (RTM) and private television channels have incorporated ideas from 1Malaysia into numerous TV programs. The use of multi-lingual hosts and actors from different ethnicities is one of the methods uses to promote national unity.
1Malaysia clinics
Prime Minister Najib's Budget 2010 includes funding for 50 medical clinics to provide basic medical services for illnesses and injuries such as fever, cough, colds, wounds and cuts, diabetes, and hypertension. Malaysia citizens are charged RM1 for treatment and medication. Non-citizens are charged RM15.
Immediately after assuming the office of Prime Minister of Malaysia Dato Ser Najib Tun Razak introduced a series of KPIs in order to measure and improve the efficiency and quality of government services as well as realizing the 1Malaysia concept. Najib said that KPIs were implemented to ensure “the people’s satisfaction...whether they are satisfied with our service, whether we have solved their problems.”
Najib's announcement of the KPI effort was generally well-received. Deputy Prime Minister Tan Sri Muhyiddin Yassin said the KPI formula was a yardstick against which the people could measure the performance of Najib and the government. He said the KPIs would provide motivation for every minister to perform well.
The KPIs provide a mechanism for the evaluation of ministries and other government agencies including performance reviews carried out every six months. Each ministry has been required to establish specific KPIs including that focus on policy outcomes over the traditional emphasis on inputs typically found in government performance assessments and planning. KPIs include detailed job descriptions and goals for ministers, deputy ministers, and some other senior government officials.
Najib has identified six major policy areas in which KPIs will play an especially important role in improving the effectiveness of the Malaysian government. These are known as National Key Result Areas (NKRAs). The NKRAs include crime prevention, reducing government corruption, increased access to quality education, improvements in the standard of living for low income groups, upgrades to rural infrastructure, and improvements in public transportation.
Najib also introduced a new cabinet position to support the Unity and Performance Minister in implementing the KPI system. Idris Jala, the former CEO of Malaysia Airlines, was appointed Minister Without a Portfolio and CEO of Performance Management and Delivery Unit (Pemandu), to work with Dr. Koh Tsu Koon in training over 500 government officers to implement the KPI system. As CEO of Pemandu Idris will support the work of Koh, who is the minister in charge of National Unity and Performance Management.
Website and social media
1Malaysia.com.my has been created in order to facilitate the 1Malaysia campaign by providing a platform for public dialogue that Prime Minister Razak claims will promote Malaysian unity, religious and ethnic tolerance, as well as a deeper appreciation of Malaysia’s cultural diversity. 1Malaysia is also making extensive use of social media tools such as Facebook and Twitter.
Promotional activities
The 1Malaysia concept is being promoted through a wide range of activities.
Prime Minister Najib has instructed the National Civics Bureau or Biro Tata Negara (BTN) to use its courses and seminars to educate present and future civil servants, politicians, and community leaders about 1Malaysia and promote national unity. Deputy Prime Minister Ahmad stated, “We will ensure that the BTN courses also inculcate the 1Malaysia concept and its eight values, namely high performance culture, accuracy, knowledge, innovation, integrity, strong will, loyalty and wisdom.”
Radio Television Malaysia (RTM) and private television channels have incorporated ideas from 1Malaysia into numerous TV programs. The use of multi-lingual hosts and actors from different ethnicities is one of the methods uses to promote national unity.
1Malaysia clinics
Prime Minister Najib's Budget 2010 includes funding for 50 medical clinics to provide basic medical services for illnesses and injuries such as fever, cough, colds, wounds and cuts, diabetes, and hypertension. Malaysia citizens are charged RM1 for treatment and medication. Non-citizens are charged RM15.
1Malaysia Foundation
The 1Malaysia Foundation (Y1M) Foundation was established in 2009 to promote and develop the idea of 1Malaysia. Y1M works to coordinate and supplement government and private-sector activities related to 1Malaysia. Chairman of the Y1M Board of Trustees, Dr Chandra Muzaffar said, "Y1M is planning to expand and strengthen the commitment from all Malaysians towards national unity through various activities to increase public awareness and community development."
Thursday, April 22, 2010
STRAIGHT CABLE
The information listed here is to assist Network Administrators in the color coding of Ethernet cables. Please be aware that modifying Ethernet cables improperly may cause loss of network connectivity. Use this information at your own risk, and insure all connectors and cables are modified in accordance with standards. The Internet Centre and its affiliates cannot be held liable for the use of this information in whole or in part.
T-568A Straight-Through Ethernet Cable
The TIA/EIA 568-A standard which was ratified in 1995, was replaced by the TIA/EIA 568-B standard in 2002 and has been updated since. Both standards define the T-568A and T-568B pin-outs for using Unshielded Twisted Pair cable and RJ-45 connectors for Ethernet connectivity. The standards and pin-out specification appear to be related and interchangeable, but are not the same and should not be used interchangeably.
T-568B Straight-Through Ethernet Cable
Both the T-568A and the T-568B standard Straight-Through cables are used most often as patch cords for your Ethernet connections. If you require a cable to connect two Ethernet devices directly together without a hub or when you connect two hubs together, you will need to use a Crossover cable instead.
RJ-45 Crossover Ethernet Cable
A good way of remembering how to wire a Crossover Ethernet cable is to wire one end using the T-568A standard and the other end using the T-568B standard. Another way of remembering the color coding is to simply switch the Green set of wires in place with the Orange set of wires. Specifically, switch the solid Green (G) with the solid Orange, and switch the green/white with the orange/white.
Ethernet Cable Instructions:
Pull the cable off the reel to the desired length and cut. If you are pulling cables through holes, its easier to attach the RJ-45 plugs after the cable is pulled. The total length of wire segments between a PC and a hub or between two PC's cannot exceed 100 Meters (328 feet) for 100BASE-TX and 300 Meters for 10BASE-T.
Start on one end and strip the cable jacket off (about 1") using a stripper or a knife. Be extra careful not to nick the wires, otherwise you will need to start over.
Spread, untwist the pairs, and arrange the wires in the order of the desired cable end. Flatten the end between your thumb and forefinger. Trim the ends of the wires so they are even with one another, leaving only 1/2" in wire length. If it is longer than 1/2" it will be out-of-spec and susceptible to crosstalk. Flatten and insure there are no spaces between wires.
Hold the RJ-45 plug with the clip facing down or away from you. Push the wires firmly into the plug. Inspect each wire is flat even at the front of the plug. Check the order of the wires. Double check again. Check that the jacket is fitted right against the stop of the plug. Carefully hold the wire and firmly crimp the RJ-45 with the crimper.
Check the color orientation, check that the crimped connection is not about to come apart, and check to see if the wires are flat against the front of the plug. If even one of these are incorrect, you will have to start over. Test the Ethernet cable.
T-568A Straight-Through Ethernet Cable
The TIA/EIA 568-A standard which was ratified in 1995, was replaced by the TIA/EIA 568-B standard in 2002 and has been updated since. Both standards define the T-568A and T-568B pin-outs for using Unshielded Twisted Pair cable and RJ-45 connectors for Ethernet connectivity. The standards and pin-out specification appear to be related and interchangeable, but are not the same and should not be used interchangeably.
T-568B Straight-Through Ethernet Cable
Both the T-568A and the T-568B standard Straight-Through cables are used most often as patch cords for your Ethernet connections. If you require a cable to connect two Ethernet devices directly together without a hub or when you connect two hubs together, you will need to use a Crossover cable instead.
RJ-45 Crossover Ethernet Cable
A good way of remembering how to wire a Crossover Ethernet cable is to wire one end using the T-568A standard and the other end using the T-568B standard. Another way of remembering the color coding is to simply switch the Green set of wires in place with the Orange set of wires. Specifically, switch the solid Green (G) with the solid Orange, and switch the green/white with the orange/white.
Ethernet Cable Instructions:
Pull the cable off the reel to the desired length and cut. If you are pulling cables through holes, its easier to attach the RJ-45 plugs after the cable is pulled. The total length of wire segments between a PC and a hub or between two PC's cannot exceed 100 Meters (328 feet) for 100BASE-TX and 300 Meters for 10BASE-T.
Start on one end and strip the cable jacket off (about 1") using a stripper or a knife. Be extra careful not to nick the wires, otherwise you will need to start over.
Spread, untwist the pairs, and arrange the wires in the order of the desired cable end. Flatten the end between your thumb and forefinger. Trim the ends of the wires so they are even with one another, leaving only 1/2" in wire length. If it is longer than 1/2" it will be out-of-spec and susceptible to crosstalk. Flatten and insure there are no spaces between wires.
Hold the RJ-45 plug with the clip facing down or away from you. Push the wires firmly into the plug. Inspect each wire is flat even at the front of the plug. Check the order of the wires. Double check again. Check that the jacket is fitted right against the stop of the plug. Carefully hold the wire and firmly crimp the RJ-45 with the crimper.
Check the color orientation, check that the crimped connection is not about to come apart, and check to see if the wires are flat against the front of the plug. If even one of these are incorrect, you will have to start over. Test the Ethernet cable.
CROSS CABLE
An Ethernet crossover cable is a type of Ethernet cable used to connect computing devices together directly where they would normally be connected via a network switch, hub or router, such as directly connecting two personal computers via their network adapters.
The 10BASE-T and 100BASE-TX Ethernet standards use one wire pair for transmission in each direction. The Tx+ line from each device connects to the tip conductor, and the Tx- line is connected to the ring. This requires that the transmit pair of each device be connected to the receive pair of the device on the other end. When a terminal device is connected to a switch or hub, this crossover is done internally in the switch or hub. A standard straight through cable is used for this purpose where each pin of the connector on one end is connected to the corresponding pin on the other connector.One terminal device may be connected directly to another without the use of a switch or hub, but in that case the crossover must be done externally in the cable. Since 10BASE-T and 100BASE-TX use pairs 2 and 3, these two pairs must be swapped in the cable. This is a crossover cable. A crossover cable must also be used to connect two internally crossed devices (e.g., two hubs) as the internal crossovers cancel each other out. This can also be accomplished by using a straight through cable in series with a modular crossover adapter.Because the only difference between the T568A and T568B pin/pair assignments are that pairs 2 and 3 are swapped, a crossover cable may be envisioned as a cable with one connector following T568A and the other T568B. Such a cable will work for 10BASE-T or 100BASE-TX. 1000BASE-T4 (Gigabit crossover), which uses all four pairs, requires the other two pairs (1 and 4) to be swapped and also requires the solid/striped within each of those two pairs to be swapped.
The 10BASE-T and 100BASE-TX Ethernet standards use one wire pair for transmission in each direction. The Tx+ line from each device connects to the tip conductor, and the Tx- line is connected to the ring. This requires that the transmit pair of each device be connected to the receive pair of the device on the other end. When a terminal device is connected to a switch or hub, this crossover is done internally in the switch or hub. A standard straight through cable is used for this purpose where each pin of the connector on one end is connected to the corresponding pin on the other connector.One terminal device may be connected directly to another without the use of a switch or hub, but in that case the crossover must be done externally in the cable. Since 10BASE-T and 100BASE-TX use pairs 2 and 3, these two pairs must be swapped in the cable. This is a crossover cable. A crossover cable must also be used to connect two internally crossed devices (e.g., two hubs) as the internal crossovers cancel each other out. This can also be accomplished by using a straight through cable in series with a modular crossover adapter.Because the only difference between the T568A and T568B pin/pair assignments are that pairs 2 and 3 are swapped, a crossover cable may be envisioned as a cable with one connector following T568A and the other T568B. Such a cable will work for 10BASE-T or 100BASE-TX. 1000BASE-T4 (Gigabit crossover), which uses all four pairs, requires the other two pairs (1 and 4) to be swapped and also requires the solid/striped within each of those two pairs to be swapped.
Subscribe to:
Posts (Atom)